2.5P 430 × 15 mm 800# Orange Non-Woven Nylon Abrasive Wheel for Medium-Cut Transition Finishing of Stainless Steel and Iron
The Orange wheel is marked 2.5P, 430 × 15 mm and 800#, and Weike positions it as a medium-cut wheel balancing removal efficiency with surface quality.
This non-woven nylon abrasive wheel is positioned for transition from rough grinding to fine polishing, light-to-moderate oxide removal and machining-mark refinement within cleaning, brushing, deburring, defect refinement or brightening workflows.
Selection must be based on size, grade, density/hardness, abrasive, machine interface and maximum operating speed—not color alone.
Product Certification
The Orange Non-Woven Nylon Abrasive Wheel is published as 2.5P, 430 × 15 mm and 800#. Weike positions it as a medium-cut transition wheel for removing moderate oxidation and fine machining marks while moving a surface from rough grinding toward finer polishing. Its higher-density, flexible web targets batch hardware work and a uniform finish on broad panels and curved parts. The page also says the set contains large and small sizes, but the smaller specification is not published and must not be invented.
The commercial value of a non-woven nylon abrasive wheel is its combination of cutting action, conformability and repeatable surface finish. The open web promotes swarf evacuation, while flexible contact can reduce the risk of deep gouging on contours compared with rigid wheels. Scratch pattern, heat and substrate removal still depend on mineral, grade, density, pressure, surface speed and dwell time.
Keep published facts separate from parameters awaiting confirmation. The page marks 800# while describing medium cut, without explaining the color/number grading logic; retain the published markings and request a factory grade cross-reference. Do not promise fixed life, an absolutely scratch-free result, elimination of later polishing or suitability for every metal before written factory confirmation and sample approval.
Product Specifications
| Product | Orange Non-Woven Nylon Abrasive Wheel |
| model | 2.5P 430 × 15 mm 800# Orange Non-Woven Nylon Abrasive Wheel |
| size | 430 mm outside diameter × 15 mm thickness; page marks 2.5P and 800# |
| Construction | higher-density flexible non-woven nylon abrasive wheel; page marked 2.5P and 800# |
| Recommended stage | transition from rough grinding to fine polishing, light-to-moderate oxide removal and machining-mark refinement |
| Main tasks | moderate oxidation, fine machining marks, leveling after rough grinding and transition to fine polishing |
| materials/workpieces | stainless steel, iron, broad panels and small hardware-line parts |
| Unpublished | abrasive mineral, exact grade definition, density/hardness, resin, maximum RPM, weight, packaging, MOQ, lead time, SDS and inspection standard |
| Confirm before quotation | attachment, directional requirement, dry/wet compatibility, machine speed, sample result and compliance documents |
Features & Advantages
• Non-woven nylon combines conformable contact with sustained abrasive action for controlled surface change.
• The open three-dimensional structure promotes swarf evacuation, reduces loading and supports a more uniform pattern.
• Medium cutting suits the rough-to-fine transition, while higher fiber density and a flexible base combine batch durability with contour following.
• One wheel can reduce tool changes across flats, curves and common contours.
• Color helps shop-floor identification within this range but does not replace a technical grade or process card.
• Sample trials can compare cut rate, pattern, gloss, temperature, life and downstream processing.
Applications
• moderate-oxide removal on stainless steel and iron, machining-mark refinement on hardware, leveling broad panels and curves, and transition work between rough grinding and fine polishing
• Surface cleaning, defect refinement, brushing/satin finishing or pre-polishing on stainless steel, aluminum, copper, steel and general metals, selected by product position and trial
• Hardware, kitchen/bathroom, door/window, small automotive, decorative, mold and metalworking projects
• Controlled finishing of flats, curves, edges and irregular contours
• Industrial distribution, sample development, OEM specifications and volume procurement
• Not recommended on fragile edges, precision dimensions, soft coatings or high-value finished surfaces without a trial
How to Use
1. Confirm the substrate, incoming defect and target finish. Test on scrap or a hidden area first.
2. Inspect the wheel for moisture, cracks, deformation, chunk loss or center damage. Confirm size and attachment compatibility.
3. Obtain the maximum operating speed from the label or technical sheet. The machine no-load speed must not exceed the wheel rating. Do not use the wheel while the rating is unknown.
4. Fit the specified flanges/spacers and guard. Isolate energy before mounting and tightening. If the wheel carries a direction arrow, install it accordingly.
5. Secure the workpiece and wear appropriate eye/face, hand, hearing and respiratory protection. Control dust, sparks and combustibles.
6. Run the wheel briefly without load while standing clear of the plane of rotation. Start with light pressure, a small contact area and short dwell, keeping the workpiece or wheel moving.
7. Check cut rate, pattern, temperature, gloss and substrate change in stages. Do not use heavy pressure to compensate for the wrong grade.
8. Stop immediately for abnormal vibration, damage, odor, overheating or a sharp performance drop. Wait for a complete stop and isolate energy before inspection or replacement.
