2.5P 430 × 15 mm 600# Green Non-Woven Nylon Abrasive Wheel for Fine Brushing and Uniform Matte Finishing Before Mirror Polishing
The Green wheel is marked 2.5P, 430 × 15 mm and 600#, and Weike positions it as a soft ultra-fine finishing wheel for scratch refinement before mirror polishing.
This non-woven nylon abrasive wheel is positioned for fine finishing before mirror polishing, fine brushing, uniform matte work and decorative brightening within cleaning, brushing, deburring, defect refinement or brightening workflows.
Selection must be based on size, grade, density/hardness, abrasive, machine interface and maximum operating speed—not color alone.
Product Certification
The Green Non-Woven Nylon Abrasive Wheel is published as 2.5P, 430 × 15 mm and 600#, with a one-piece hot-pressed fiber structure. Weike positions it as an ultra-fine stage before mirror polishing to refine coarser prior marks and create a uniform fine matte or brushed finish on bathroom hardware and decorative components. Its 430 mm diameter is better suited to broad continuous finishing on stationary equipment, subject to joint confirmation of bore, flanges, direction and surface speed by the factory and machine owner.
The commercial value of a non-woven nylon abrasive wheel is its combination of cutting action, conformability and repeatable surface finish. The open web promotes swarf evacuation, while flexible contact can reduce the risk of deep gouging on contours compared with rigid wheels. Scratch pattern, heat and substrate removal still depend on mineral, grade, density, pressure, surface speed and dwell time.
Keep published facts separate from parameters awaiting confirmation. 2.5P and 600# are page markings without a published test system; do not convert them into another brand’s density, hardness or grit standard. Do not promise fixed life, an absolutely scratch-free result, elimination of later polishing or suitability for every metal before written factory confirmation and sample approval.
Product Specifications
| Product | Green Non-Woven Nylon Abrasive Wheel |
| model | 2.5P 430 × 15 mm 600# Green Non-Woven Nylon Abrasive Wheel |
| size | 430 mm outside diameter × 15 mm thickness; page marks 2.5P and 600# |
| Construction | one-piece hot-pressed non-woven nylon abrasive wheel; page marked 2.5P and 600# |
| Recommended stage | fine finishing before mirror polishing, fine brushing, uniform matte work and decorative brightening |
| Main tasks | refining coarser prior-process marks, fine brushing, uniform matte finishing and decorative brightening |
| Published materials/workpieces | soft metals, bathroom hardware and decorative parts; the category also lists stainless steel, aluminum, copper and metal castings |
| Unpublished | abrasive mineral, exact grade definition, density/hardness, resin, maximum RPM, weight, packaging, MOQ, lead time, SDS and inspection standard |
| Confirm before quotation | attachment, directional requirement, dry/wet compatibility, machine speed, sample result and compliance documents |
Features & Advantages
• Non-woven nylon combines conformable contact with sustained abrasive action for controlled surface change.
• The open three-dimensional structure promotes swarf evacuation, reduces loading and supports a more uniform pattern.
• The large diameter and ultra-fine position suit broad fine brushing and pre-mirror leveling, while the one-piece hot-pressed structure helps reduce shedding, delamination and vibration risk.
• One wheel can reduce tool changes across flats, curves and common contours.
• Color helps shop-floor identification within this range but does not replace a technical grade or process card.
• Sample trials can compare cut rate, pattern, gloss, temperature, life and downstream processing.
Applications
• fine brushing of bathroom hardware and decorative parts, soft-metal refinement, broad uniform matte finishing, reduction of coarser prior marks and preparation before mirror polishing
• Surface cleaning, defect refinement, brushing/satin finishing or pre-polishing on stainless steel, aluminum, copper, steel and general metals, selected by product position and trial
• Hardware, kitchen/bathroom, door/window, small automotive, decorative, mold and metalworking projects
• Controlled finishing of flats, curves, edges and irregular contours
• Industrial distribution, sample development, OEM specifications and volume procurement
• Not recommended on fragile edges, precision dimensions, soft coatings or high-value finished surfaces without a trial
How to Use
1. Confirm the substrate, incoming defect and target finish. Test on scrap or a hidden area first.
2. Inspect the wheel for moisture, cracks, deformation, chunk loss or center damage. Confirm size and attachment compatibility.
3. Obtain the maximum operating speed from the label or technical sheet. The machine no-load speed must not exceed the wheel rating. Do not use the wheel while the rating is unknown.
4. Fit the specified flanges/spacers and guard. Isolate energy before mounting and tightening. If the wheel carries a direction arrow, install it accordingly.
5. Secure the workpiece and wear appropriate eye/face, hand, hearing and respiratory protection. Control dust, sparks and combustibles.
6. Run the wheel briefly without load while standing clear of the plane of rotation. Start with light pressure, a small contact area and short dwell, keeping the workpiece or wheel moving.
7. Check cut rate, pattern, temperature, gloss and substrate change in stages. Do not use heavy pressure to compensate for the wrong grade.
8. Stop immediately for abnormal vibration, damage, odor, overheating or a sharp performance drop. Wait for a complete stop and isolate energy before inspection or replacement.
