60 × 180 × 26 mm Non-Woven Flap Wheel for Brushing Tube Interiors, Exteriors and Aluminum Profiles
60 × 180 × 26 mm Non-Woven Flap Wheel is an industrial non-woven flap wheel for continuous brushing, rust removal and matte finishing of tubes and long profiles. Its long cylindrical form is intended for brushing, rust removal and matte finishing on tube interiors/exteriors and long profiles, following slender curved workpieces continuously.
Its non-woven flaps provide conformable contact, open swarf evacuation and a consistent pattern for controlled batch finishing.
Selection must consider size, grit, density/hardness, abrasive, center construction, machine interface and maximum operating speed.
Product Certification
The 60 × 180 × 26 mm Non-Woven Flap Wheel targets continuous finishing of slender round tubes and profiles. Its long cylindrical face brushes, derusts and creates a matte finish along stainless-steel tubes, aluminum profiles and similar workpieces. Multiple non-woven layers are laminated into a tough, evenly wearing body with a hollow bore for sanding-roller or dedicated brushing equipment.
A non-woven flap wheel maintains contact through multiple flexible abrasive flaps. As the flaps wear, fresh abrasive is gradually exposed, supporting a more stable cut and pattern in cleaning, scratch blending, brushing and satin finishing. The open construction promotes heat and swarf release, but stock removal, temperature, life and roughness still depend on mineral, grit, density, surface speed, pressure and feed rate.
The page does not define the three-dimension order or publish grit, bore tolerance or maximum RPM; do not present 26 mm as the final bore specification without confirmation. Obtain the factory specification and approve a sample on the production substrate, incoming defect and machine before final publication.
Product Specifications
| Product | 60 × 180 × 26 mm Non-Woven Flap Wheel |
| model | 60 × 180 × 26 mm Non-Woven Flap Wheel |
| size | 60 × 180 × 26 mm |
| Construction/attachment | long cylindrical multi-layer laminated body with standard hollow bore; machine and dimension order pending |
| Process | continuous brushing, rust removal and matte finishing of tubes and long profiles |
| Tasks | rust, prior-process pattern and color-depth blending on tube interiors/exteriors for a continuous uniform matte pattern |
| Confirm before quotation | dimension order, bore/shank, flanges, direction, machine speed, dry/wet compatibility and sample result |
Features & Advantages
• Conformable non-woven flaps balance cutting with fine finishing on contours.
• The open web and inter-flap gaps promote cooling, swarf evacuation and loading resistance.
• The long face covers slender tubes and supports a continuous pattern with fewer local shade differences.
• Continuous abrasive exposure supports a more consistent batch finish.
• Multiple sizes, grits and attachments cover stationary, portable and dedicated-machine applications.
• Color, center and appearance are identifiers only and do not replace grit, density or technical specifications.
Applications
• brushing stainless tube, matte finishing aluminum profiles, refining guardrails/long-tube exteriors and accessible tube interiors
• Rust/oxide cleanup, machining-mark blending, brushing and satin finishing of stainless steel, aluminum profiles, iron and general metals, selected by product-page position and trial
• Hardware, kitchen/bathroom products, door/window profiles, tubes, decorative sheet, small automotive parts and precision die castings
• Batch surface conditioning requiring a uniform pattern, lower loading and contour following
• Industrial distribution, machine matching, OEM specifications and replacement programs
• Not recommended on precision dimensions, soft coatings or mirror-finished parts without a trial
How to Use
1. Confirm the substrate, defect, incoming grit and target pattern. Test on scrap or a hidden area first.
2. Inspect the flaps, bore/shank and center for moisture, cracks, looseness, deformation or chunk loss. Confirm size and attachment compatibility.
3. Obtain the maximum operating speed from the label or technical sheet. The machine no-load speed must not exceed the wheel rating. Do not use the wheel while the rating is unknown.
4. Fit flanges, spacers, work rest and guard as specified by the machine. Isolate energy before mounting and tightening. Follow any direction arrow.
5. Secure the workpiece and wear suitable eye/face, hand, hearing and respiratory protection. Maintain local exhaust and control sparks, dust and combustibles.
6. Run briefly without load while standing clear of the rotation plane. Start with light pressure, short dwell and stable feed. Do not use heavy pressure to compensate for the wrong grit or density.
7. Check cut, pattern, temperature, vibration and dimensional change in stages, then adjust pressure and feed gradually.
8. Stop immediately for abnormal vibration, damage, overheating, odor or a sharp performance drop. Wait for a complete stop and isolate energy before inspection, cleaning or replacement.
