240-Grit 160 × 15 × 26 mm Non-Woven Flap Wheel for Precision Brushing of Narrow Edges and Small Flats
240-Grit 160 × 15 × 26 mm Non-Woven Flap Wheel is an industrial non-woven flap wheel for light-oxide and stamping-mark cleanup plus fine matte brushing on narrow edges and small flats. Uniform radial slots, a 15 mm slim face and wooden core target precision brushing of bathroom hardware, narrow edges and small decorative parts.
Its non-woven flaps provide conformable contact, open swarf evacuation and a consistent pattern for controlled batch finishing.
Selection must consider size, grit, density/hardness, abrasive, center construction, machine interface and maximum operating speed.
• 160 mm slim disc with radial slots and wooden core for center support and balance.
• Gaps between flaps promote ventilation, heat release and swarf evacuation, while the open web helps reduce metal-debris loading.
• Process position: light-oxide and stamping-mark cleanup plus fine matte brushing on narrow edges and small flats.
• Main tasks: stamping marks, light oxide and narrow-edge scratch cleanup with a fine matte pattern.
• Suitable for narrow edges, small flats, bathroom hardware and small decorative parts; the wooden core must be clamped with correct flanges.
• Conformable non-woven flaps follow common curves, contours and edges, reducing deep-gouge risk compared with rigid tools on complex surfaces.
Product Certification
The 240-Grit 160 × 15 × 26 mm Non-Woven Flap Wheel targets precision brushing of narrow edges and small flats. Its 160 mm wheel with a 15 mm slim face concentrates action on stamping marks and light oxide. Uniform radial slots promote cooling, while the wooden core provides center support. Green high-cutting non-woven flaps refine light defects and produce a fine matte surface on bathroom hardware and small decorative parts.
A non-woven flap wheel maintains contact through multiple flexible abrasive flaps. As the flaps wear, fresh abrasive is gradually exposed, supporting a more stable cut and pattern in cleaning, scratch blending, brushing and satin finishing. The open construction promotes heat and swarf release, but stock removal, temperature, life and roughness still depend on mineral, grit, density, surface speed, pressure and feed rate.
Retain both the published 240 grit and high-cutting description, but do not infer mineral, density or a fixed roughness result. Obtain the factory specification and approve a sample on the production substrate, incoming defect and machine before final publication.
Product Specifications
| Product | 240-Grit 160 × 15 × 26 mm Non-Woven Flap Wheel |
| size | 160 × 15 × 26 mm |
| Construction/attachment | 240 grit, radially slotted slim disc, 15 mm face, wooden core; center interface pending |
| Process | light-oxide and stamping-mark cleanup plus fine matte brushing on narrow edges and small flats |
| Tasks | stamping marks, light oxide and narrow-edge scratch cleanup with a fine matte pattern |
| Confirm before quotation | dimension order, bore/shank, flanges, direction, machine speed, dry/wet compatibility and sample result |
Features & Advantages
• Conformable non-woven flaps balance cutting with fine finishing on contours.
• The open web and inter-flap gaps promote cooling, swarf evacuation and loading resistance.
• The 15 mm face improves narrow-edge control, while radial slots and wooden core support cooling and stable running.
• Continuous abrasive exposure supports a more consistent batch finish.
• Multiple sizes, grits and attachments cover stationary, portable and dedicated-machine applications.
• Color, center and appearance are identifiers only and do not replace grit, density or technical specifications.
Applications
• stamping-mark and light-oxide cleanup plus precision matte brushing on bathroom hardware, small decorative parts and narrow stainless flats
• Rust/oxide cleanup, machining-mark blending, brushing and satin finishing of stainless steel, aluminum profiles, iron and general metals, selected by product-page position and trial
• Hardware, kitchen/bathroom products, door/window profiles, tubes, decorative sheet, small automotive parts and precision die castings
• Batch surface conditioning requiring a uniform pattern, lower loading and contour following
• Industrial distribution, machine matching, OEM specifications and replacement programs
• Not recommended on precision dimensions, soft coatings or mirror-finished parts without a trial
How to Use
1. Confirm the substrate, defect, incoming grit and target pattern. Test on scrap or a hidden area first.
2. Inspect the flaps, bore/shank and center for moisture, cracks, looseness, deformation or chunk loss. Confirm size and attachment compatibility.
3. Obtain the maximum operating speed from the label or technical sheet. The machine no-load speed must not exceed the wheel rating. Do not use the wheel while the rating is unknown.
4. Fit flanges, spacers, work rest and guard as specified by the machine. Isolate energy before mounting and tightening. Follow any direction arrow.
5. Secure the workpiece and wear suitable eye/face, hand, hearing and respiratory protection. Maintain local exhaust and control sparks, dust and combustibles.
6. Run briefly without load while standing clear of the rotation plane. Start with light pressure, short dwell and stable feed. Do not use heavy pressure to compensate for the wrong grit or density.
7. Check cut, pattern, temperature, vibration and dimensional change in stages, then adjust pressure and feed gradually.
8. Stop immediately for abnormal vibration, damage, overheating, odor or a sharp performance drop. Wait for a complete stop and isolate energy before inspection, cleaning or replacement.
