100 × 60 × 15 mm Mounted Non-Woven Flap Wheel for Fine Finishing of Holes, Grooves and Small Irregular Parts
100 × 60 × 15 mm Mounted Non-Woven Flap Wheel is an industrial non-woven flap wheel for small-part deburring, fine brushing, prototype refinement and local repair. An integrated screw-on shank mounts directly to a cordless drill or straight grinder for holes, edge grooves and irregular parts that large wheels cannot reach.
Its non-woven flaps provide conformable contact, open swarf evacuation and a consistent pattern for controlled batch finishing.
Selection must consider size, grit, density/hardness, abrasive, center construction, machine interface and maximum operating speed.
• Working layer: resin-bonded non-woven nylon abrasive flaps arranged radially around a center.
• A soft non-woven working layer helps reduce substrate-damage risk on copper, aluminum and precision die castings.
• Compact short cylindrical body with integrated screw-on shank for flexible handheld access.
• Gaps between flaps promote ventilation, heat release and swarf evacuation, while the open web helps reduce metal-debris loading.
• Process position: small-part deburring, fine brushing, prototype refinement and local repair.
• Main tasks: small-hole burrs, edge-groove marks, light cleanup and fine brushing of irregular small parts.
• Portable mounting improves local access and prototype/repair efficiency, while soft contact suits small, complex parts.
Product Certification
The 100 × 60 × 15 mm Mounted Non-Woven Flap Wheel is a portable detail-finishing tool. Its integrated screw-on shank fits a cordless drill or straight grinder, while the compact short cylindrical body reaches small hardware holes, edge grooves and local areas on irregular parts. The soft non-woven material suits deburring and fine brushing of copper, aluminum and precision die castings, plus prototype, repair, jewelry and bathroom-hardware work.
A non-woven flap wheel maintains contact through multiple flexible abrasive flaps. As the flaps wear, fresh abrasive is gradually exposed, supporting a more stable cut and pattern in cleaning, scratch blending, brushing and satin finishing. The open construction promotes heat and swarf release, but stock removal, temperature, life and roughness still depend on mineral, grit, density, surface speed, pressure and feed rate.
The page does not publish thread, maximum RPM or grit; do not assign a 15 mm interface or claim universal cordless-drill fit. Obtain the factory specification and approve a sample on the production substrate, incoming defect and machine before final publication.
Product Specifications
| Product | 100 × 60 × 15 mm Mounted Non-Woven Flap Wheel |
| size | 100 × 60 × 15 mm |
| Construction/attachment | compact cylindrical body with integrated threaded shank; cordless-drill/straight-grinder candidate, interface pending |
| Process | small-part deburring, fine brushing, prototype refinement and local repair |
| Tasks | small-hole burrs, edge-groove marks, light cleanup and fine brushing of irregular small parts |
| Confirm before quotation | dimension order, bore/shank, flanges, direction, machine speed, dry/wet compatibility and sample result |
Features & Advantages
• Conformable non-woven flaps balance cutting with fine finishing on contours.
• The open web and inter-flap gaps promote cooling, swarf evacuation and loading resistance.
• Portable access reaches holes, grooves and irregular small parts for prototypes, repair and detailed local work.
• Continuous abrasive exposure supports a more consistent batch finish.
• Multiple sizes, grits and attachments cover stationary, portable and dedicated-machine applications.
• Color, center and appearance are identifiers only and do not replace grit, density or technical specifications.
Applications
• deburring copper/aluminum parts, finishing die-cast grooves, local brushing of bathroom hardware, jewelry components and repair samples
• Rust/oxide cleanup, machining-mark blending, brushing and satin finishing of stainless steel, aluminum profiles, iron and general metals, selected by product-page position and trial
• Hardware, kitchen/bathroom products, door/window profiles, tubes, decorative sheet, small automotive parts and precision die castings
• Batch surface conditioning requiring a uniform pattern, lower loading and contour following
• Industrial distribution, machine matching, OEM specifications and replacement programs
• Not recommended on precision dimensions, soft coatings or mirror-finished parts without a trial
How to Use
1. Confirm the substrate, defect, incoming grit and target pattern. Test on scrap or a hidden area first.
2. Inspect the flaps, bore/shank and center for moisture, cracks, looseness, deformation or chunk loss. Confirm size and attachment compatibility.
3. Obtain the maximum operating speed from the label or technical sheet. The machine no-load speed must not exceed the wheel rating. Do not use the wheel while the rating is unknown.
4. Fit flanges, spacers, work rest and guard as specified by the machine. Isolate energy before mounting and tightening. Follow any direction arrow.
5. Secure the workpiece and wear suitable eye/face, hand, hearing and respiratory protection. Maintain local exhaust and control sparks, dust and combustibles.
6. Run briefly without load while standing clear of the rotation plane. Start with light pressure, short dwell and stable feed. Do not use heavy pressure to compensate for the wrong grit or density.
7. Check cut, pattern, temperature, vibration and dimensional change in stages, then adjust pressure and feed gradually.
8. Stop immediately for abnormal vibration, damage, overheating, odor or a sharp performance drop. Wait for a complete stop and isolate energy before inspection, cleaning or replacement.
